PacketHawk Bypass TAP
Chassis for
1G/10G/40G/100G Moduls

HIGHLIGHTS

• Supports 10G/40G/100G networks
• Supports 2 In-Line devices on a single network line
• Heartbeat packet: ICMP, IPX, UDP, firewall support
• Network and In-Line port health check as well as speed and duplex monitoring
• 6 bypass modes: auto, semi-auto, force inline, force bypass, tap-separate, tap-aggregate
• Console, Telnet, SSH, HTTP, HTTPS interfaces
• Link Loss Detection (LLD), behaviour in the event of a network connection failure
• Redundant bypass behaviour in the event of a Bypass TAP/switch failure : Active Bypass, Passive Bypass
• Supports TAP mode: Net A, Net B traffic any-to-any mapping
• Supports mirror mode: mapping of In-Line 1 to In-Line 2, In-Line 2 to In-Line 1 port traffic
• Filtering by In-Line port IP, port : include or exclude
• Syslog support (registration of up to 5 syslog servers)
• Supports ACL (Access Control List) policies for the management port

KEY FEATURES

• 19” 1U rackmount 2-slots chassis, modular type
• High-Availability: 1×2 Inline bypass TAP supporting (1) Network line (2) Inline devices.
• Inline device heartbeat health check: Unidirectional, Bidirectional
• Supported Heartbeat packet: ICMP, IPX, UDP(* TCP) and Firewall health check (* special feature)
• System health LED indicators:
• Network/Inline port link/activity, operation mode (Bypass/Inline), power, fan
• Supported packet size: 64~9,000 byte
• Traffic auto-refresh statistics per port: Byte/bps/pps, Uni/Multi/Broadcast packet, packet size, utilization%, Runt/Jumbo packet, CRC error, drop count
• Operation mode:
• Network: Auto, Semi-Auto, force Inline, force bypass
• Inline: Single, Service-chain, load balance, Active/Standby and TAP(mirror) mode
• Combine Inline and TAP mode: "2 x Inline" or "1 x Inline + 1 x TAP" or "2 x TAP”
• Inline port TAP(mirror) mode support:
• Net A, Net B traffic Any-to-Any mapping
• Breakout, Aggregation
• Redundant bypass operation in case of bypass TAP failure: active bypass, passive bypass
• LLD (Link Loss Detection) operation in case of network link failure
• Link-Drop operation: Inline device failure or network link failure
• Inline port L3/L4 filtering: include or exclude
• Syslog (internal: logging & viewer, external – up to 3 Syslog servers)
• SNMP v2/3, NTP, RADIUS/TACACS(*)
• 2x Management ports: serial console, Ethernet
• Management access: Telnet, SSH, HTTP, HTTPS (enable/disable, Service Port Custom)
• ACL (Access Control List) on management port (based on host & network address)
• Port DDM (Digital Diagnostic Monitoring)
• System health monitoring LED indicator: power, fan, port link/activity, operation mode
• Configuration export/import
• Hot-swappable redundant power supply & fan module